A no-flow warning protects the cell from generating without adequate water movement. Dirty filters, closed valves, low pump speed, air leaks, and failed flow switches are common causes.
The mistake most pool owners make is treating the symptom first. With a saltwater pool, the better move is to check the system in order: water balance, flow, filtration, salt level, and then the salt cell.
A salt chlorine generator can only work with the water it is given. If pH, alkalinity, stabilizer, or calcium hardness are out of range, the pool can drift even when the control panel says the cell is producing chlorine.
Use Pool Chemical Calculator to calculate pH, chlorine, alkalinity, stabilizer, and calcium adjustments without guessing.
Download for iPhone/iPad · Download for Android · Use the website
If you need test supplies, cleaning tools, or replacement maintenance parts, compare saltwater pool maintenance supplies on Amazon.
Make one change at a time, circulate the water, and retest. Saltwater pools are steady when the chemistry is steady, but they become frustrating when several small issues stack up.
No. Bypassing a safety device can allow gas buildup or equipment damage. Find and repair the flow problem or failed sensor.
Test free chlorine, pH, total alkalinity, stabilizer, calcium hardness, and salt level. Record the results so you can make one targeted adjustment at a time.
Allow the water to circulate after an adjustment, then follow the product directions and retest before adding more. Large repeated doses can create a second problem.
Get professional help when electrical faults, persistent flow errors, damaged plumbing, or unexplained water loss are involved. Those problems are not solved by adding more chemicals.
Before your next chemical adjustment, run the numbers with Pool Chemical Calculator. It is available for iPhone/iPad and Android.
Disclosure: This post contains Amazon affiliate links. As an Amazon Associate, Salty Pool may earn from qualifying purchases.
Spring opening goes more smoothly when debris removal, circulation, testing, and sanitation happen before the…
A fresh fill needs balanced water and a protected pool surface before the salt generator…
Adding salt is simple, but piles left sitting on plaster, aggregate, vinyl, or metal can…
Variable-speed pumps save energy, but the lowest circulation speed may not close the salt system…
Many salt systems reduce output or stop generating as water gets cold. That behavior can…
Salt alone is rarely the full explanation for corrosion. Stray current, improper bonding, low pH,…